Program the Yaesu FTA-850L in the Browser
Program the Yaesu FTA-850L airband radio from the browser via Web Serial, without Windows. Includes a frequency list for the Nuremberg area (EDDN), checked against the AIP.
🇩🇪 Zur deutschen Version dieses Artikels
The Yaesu FTA-850L is a handheld airband transceiver with GPS, VOR navigation and a memory for 400 channels. Filling the memory (Memory Book) directly on the radio is tedious: every channel needs a frequency, a name, a group and maybe a position. Yaesu's programming software YCE46 runs only on Windows.
So I built a small project. It programs the FTA-850 from the browser and comes with a ready-made frequency list for the Nuremberg area.
Project and full documentation: codefloe.com/bodo_te/fta850 – the details are in the README.md.
What the project does
- Programming in the browser. Chrome or Edge talk directly to the radio via Web Serial. You need no driver and no Windows. The tool is based on the web programmer from sritchie/N720AK. I extended it.
- Ready-made frequency lists. There is one list for 100 km and one for 200 km around Nuremberg (EDDN). I recommend the 100 km list, because it is checked against the AIP.
- Useful groups. The channels are split into six groups: airfields, ATIS, VORs, FIS, radar and the air-to-air channels.
- Positions for navigation. Airfields and VORs have coordinates from the AIP. The radio can use them to navigate directly to the airfield.
- Scan flag. Selected channels, for example Langen Information and Nürnberg Tower, are marked for the memory scan. In the tool you can set the checkbox for each channel.
Where the frequencies come from
The base data comes from OurAirports. A Python script filters the airfields and VORs within the radius and sorts them into groups. It shortens the names to the 14 characters that the radio shows.
OurAirports is convenient, but it is not an official source. A check against the DFS basic AIP found six wrong frequencies in the 100 km list. Some VORs no longer exist. All corrections are in separate CSV files in the data/ folder, each with the AIP page and date as the source. I read the coordinates from the aerodrome charts of the AIP and checked each value in the chart image.
Important: The AIP changes every 28 days. So even a checked list gets out of date. Before the flight, check every frequency you use against the current AIP of your country. The list does not replace flight preparation.
How the programming works
- Start the local web server with
python3 scripts/serve.py. - Open
http://localhost:8850in Chrome. - On the radio, hold SQL and switch the radio on until CP Mode appears.
- Click Read from radio and then Save .dat. This file is your backup.
- Click Import CSV and select
frequencies/nuernberg-100km.csv. - Click Program to radio.
The tool writes only the changed blocks and reads them back for verification. It does not touch settings, GPS or calibration.
A trap that is not in the manual
After the first programming, I could no longer edit any memory channel on the radio. Memory Book → Edit simply did not respond. Finding the cause took a while. In the end there were two different causes:
- A bug in the tool: For each group, the radio remembers the last selected channel. After the change to a new list, these entries pointed to channels that no longer existed. The tool now corrects these entries when it writes.
- A firmware behavior: As long as a memory channel is active in the upper or lower part of the display, the radio locks Edit. The manual does not mention this. Before you edit, set both channels to COMM. Then Edit works.
The full analysis is in edit_lock.md. It also contains some details about the memory layout of the FTA-850, for example the format of the coordinates.
For other regions
The script is not fixed to Nuremberg. With --center and --radius you can create a list for any other airfield:
python3 scripts/build_frequencies.py --center EDDM --radius 100 --name muenchen-100km
But then you must do the check against the AIP yourself. The README describes how to do this with the DFS AIP.
Conclusion
With the browser tool, you can program the FTA-850 in a few minutes, completely without Windows. The most work was not the code, but checking the data against the AIP.
You find the code, the frequency lists and the documentation at codefloe.com/bodo_te/fta850. I am happy to receive hints and corrections.
Yaesu and FTA-850 are trademarks of Yaesu Musen Co., Ltd. This project is not affiliated with Yaesu.